Cold air exposure is a treatment that has found its place within many fields of health & physical wellness such as sports clubs, medical facilities, medical practices, wellness centers, beauty shops and even for home use. Doctors, physio’s and other recovery specialists alike have adopted cold air exposure.
Installation of a cold air wellness chamber offers the opportunity to provide clients a new type of treatment. As with any other form of treatment a certain number of conditions and regulations must be followed.
The first condition is installing the cold air wellness chamber in a sufficiently large room that meets the criteria of accommodating a nitrogen based cold air wellness chamber. The recommended floor area is 15 – 20 square meters (45 – 60 square feet).
The CRYO XC™ itself is very versatile and can be installed in most type of rooms as the unit separated into parts is able to pass through doors at a width of 60 cm which is one of kind among cold air wellness chamber equipment. Nevertheless, the cold air wellness chamber requires the passage of nitrogen cylinders once the cold air wellness chamber is installed and that must therefore be considered to facilitate the supply of nitrogen cylinders.
Our cold air wellness chamber runs on liquid nitrogen, which is compressed gas into liquid form. Nitrogen in its gas form is nontoxic and is the primary component of the air that we breathe. Nevertheless, if the concentration of nitrogen in the air exceeds a certain limit (below 19% in the ambient air), there is an increased risk of hypoxia (lack of oxygen) which can lead to discomfort in the form of lightheadedness or fainting in very rare cases. That’s why we have a number of security measures in place in each and every installation. First, we require an opening on a wall with a diameter of at least 12 cm to allow for evacuation of nitrogen air from the client cold air wellness chamber. This can of course be done through a wall, or the evacuation can also be done with the help of an integrated ventilation system.
To ensure maximum safety within the cold air wellness chamber room, an air renewal system must be installed in nearly all cases. The room must also be equipped with an oxygen sensor to signal oxygen levels within the room. In case the preset level is exceeded an alarm will go off, turn on the ventilation system and make the room 100% safe.
In case of Any Questions about Quality Control & Certification & Standards of Quality please contact us on support@cryoniq.my
